Institute for Telecommunication Sciences
the research laboratory of the National Telecommunications and Information Administration

Margaret H. Pinson; Stephen Wolf

This publication has been superseded by: TR-06-433a - Reduced Reference Video Calibration Algorithms

Abstract: This report describes four Reduced Reference (RR) video calibration algorithms of low computational complexity. RR methods are useful for performing end-to-end in-service video quality measurements since these methods utilize a low bandwidth network connection between the original (source) and processed (destination) ends. The first RR video calibration algorithm computes temporal registration of the processed video stream with respect to the original video stream (i.e., video delay estimation). The second algorithm jointly calculates spatial scaling and spatial shift. The third algorithm calculates luminance gain level offset of the processed video stream with respect to the original video stream. The fourth algorithm estimates the valid video region of the original or processed video stream (i.e., the portion of the video image that contains actual picture content). All the algorithms utilize only the luminance (Y) image plane of the video signal.

Keywords: Video; gain; calibration; spatial scaling; delay; offset; spatial shift; temporal shift


To request a reprint of this report, contact:

Lilli Segre, Publications Officer
Institute for Telecommunication Sciences
(303) 497-3572
lsegre@ntia.doc.gov

For technical information concerning this report, contact:

Margaret H. Pinson
Institute for Telecommunication Sciences
(303) 497-3579
mpinson@ntia.doc.gov


Disclaimer: Certain commercial equipment, components, and software may be identified in this report to specify adequately the technical aspects of the reported results. In no case does such identification imply recommendation or endorsement by the National Telecommunications and Information Administration, nor does it imply that the equipment or software identified is necessarily the best available for the particular application or uses.

This document contains software developed by NTIA. NTIA does not make any warranty of any kind, express, implied or statutory, including, without limitation, the implied warranty of merchantability, fitness for a particular purpose, non-infringement and data accuracy. NTIA does not warrant or make any representations regarding the use of the software or the results thereof, including but not limited to the correctness, accuracy, reliability or usefulness of the software or the results. You can use, copy, modify, and redistribute the NTIA-developed software upon your acceptance of these terms and conditions and upon your express agreement to provide appropriate acknowledgments of NTIA's ownership of and development of the software by keeping this exact text present in any copied or derivative works.

Back to Search Results