Institute for Telecommunication Sciences
the research laboratory of the National Telecommunications and Information Administration

Robert J. Achatz; Roger A. Dalke

Abstract: Man-made noise generated by automotive ignition, power distribution and transmission, industrial equipment, consumer products, and lighting systems degrades the performance of radio systems. Man-made noise models, derived from measurements made in the 1970s, may be inaccurate due to changes in these technologies. For example, recent man-made noise measurements performed by ITS in the 136 to 138 MHz meteorological satellite band indicated that man-made noise power in residential areas is lower than predictions by these models. However, these same measurements indicated that man-made noise in business areas has not changed. UHF man-made noise has not been comprehensively measured and modeled. This report describes UHF man-made noise measurements conducted in the Denver, CO metropolitan area in 1999. Measurement data is analyzed and results are compared to other measurements and models. These results showed that 402.5 MHz UHF noise levels in business areas were high enough to adversely affect communication system performance some of the time.

Keywords: noise measurement; non-Gaussian noise; man-made noise; radio channel; impulsive noise; simulation of communication systems; noise modeling


To request a reprint of this report, contact:

Lilli Segre, Publications Officer
Institute for Telecommunication Sciences
(303) 497-3572
lsegre@ntia.doc.gov

For technical information concerning this report, contact:

Robert J. Achatz
Institute for Telecommunication Sciences
(303) 497-3498
rachatz@ntia.doc.gov


Disclaimer: Certain commercial equipment, components, and software may be identified in this report to specify adequately the technical aspects of the reported results. In no case does such identification imply recommendation or endorsement by the National Telecommunications and Information Administration, nor does it imply that the equipment or software identified is necessarily the best available for the particular application or uses.

Back to Search Results